乡下人产国偷v产偷v自拍,国产午夜片在线观看,婷婷成人亚洲综合国产麻豆,久久综合给合久久狠狠狠9

  • <output id="e9wm2"></output>
    <s id="e9wm2"><nobr id="e9wm2"><ins id="e9wm2"></ins></nobr></s>

    • 分享

      ping命令原代碼

       心之所指 2006-01-03
      /******************************************************************************\
      * ping.c - Simple ping utility using SOCK_RAW
      *
      * This is a part of the Microsoft Source Code Samples.
      * Copyright 1996-1997 Microsoft Corporation.
      * All rights reserved.
      * This source code is only intended as a supplement to
      * Microsoft Development Tools and/or WinHelp documentation.
      * See these sources for detailed information regarding the
      * Microsoft samples programs.
      \******************************************************************************/

      #pragma pack(4)

      #define WIN32_LEAN_AND_MEAN
      #include
      #include
      #include

      #define ICMP_ECHO 8
      #define ICMP_ECHOREPLY 0

      #define ICMP_MIN 8 // minimum 8 byte icmp packet (just header)

      /* The IP header */
      typedef struct iphdr {
      unsigned int h_len:4; // length of the header
      unsigned int version:4; // Version of IP
      unsigned char tos; // Type of service
      unsigned short total_len; // total length of the packet
      unsigned short ident; // unique identifier
      unsigned short frag_and_flags; // flags
      unsigned char ttl;
      unsigned char proto; // protocol (TCP, UDP etc)
      unsigned short checksum; // IP checksum

      unsigned int sourceIP;
      unsigned int destIP;

      }IpHeader;

      //
      // ICMP header
      //
      typedef struct _ihdr {
      BYTE i_type;
      BYTE i_code; /* type sub code */
      USHORT i_cksum;
      USHORT i_id;
      USHORT i_seq;
      /* This is not the std header, but we reserve space for time */
      ULONG timestamp;
      }IcmpHeader;

      #define STATUS_FAILED 0xFFFF
      #define DEF_PACKET_SIZE 32
      #define MAX_PACKET 1024

      #define xmalloc(s) HeapAlloc(GetProcessHeap(),HEAP_ZERO_MEMORY,(s))
      #define xfree(p) HeapFree (GetProcessHeap(),0,(p))

      void fill_icmp_data(char *, int);
      USHORT checksum(USHORT *, int);
      void decode_resp(char *,int ,struct sockaddr_in *);

      void Usage(char *progname){

      fprintf(stderr,"Usage:\n");
      fprintf(stderr,"%s [data_size]\n",progname);
      fprintf(stderr,"datasize can be up to 1Kb\n");
      ExitProcess(STATUS_FAILED);

      }
      int main(int argc, char **argv){

      WSADATA wsaData;
      SOCKET sockRaw;
      struct sockaddr_in dest,from;
      struct hostent * hp;
      int bread,datasize;
      int fromlen = sizeof(from);
      int timeout = 1000;
      char *dest_ip;
      char *icmp_data;
      char *recvbuf;
      unsigned int addr=0;
      USHORT seq_no = 0;

      if (WSAStartup(MAKEWORD(2,1),&wsaData) != 0){
      fprintf(stderr,"WSAStartup failed: %d\n",GetLastError());
      ExitProcess(STATUS_FAILED);
      }

      if (argc <2 ) {
      Usage(argv[0]);
      }
      sockRaw = WSASocket (AF_INET,
      SOCK_RAW,
      IPPROTO_ICMP,
      NULL, 0,0);

      if (sockRaw == INVALID_SOCKET) {
      fprintf(stderr,"WSASocket() failed: %d\n",WSAGetLastError());
      ExitProcess(STATUS_FAILED);
      }
      bread = setsockopt(sockRaw,SOL_SOCKET,SO_RCVTIMEO,(char*)&timeout,
      sizeof(timeout));
      if(bread == SOCKET_ERROR) {
      fprintf(stderr,"failed to set recv timeout: %d\n",WSAGetLastError());
      ExitProcess(STATUS_FAILED);
      }
      timeout = 1000;
      bread = setsockopt(sockRaw,SOL_SOCKET,SO_SNDTIMEO,(char*)&timeout,
      sizeof(timeout));
      if(bread == SOCKET_ERROR) {
      fprintf(stderr,"failed to set send timeout: %d\n",WSAGetLastError());
      ExitProcess(STATUS_FAILED);
      }
      memset(&dest,0,sizeof(dest));

      hp = gethostbyname(argv[1]);

      if (!hp){
      addr = inet_addr(argv[1]);
      }
      if ((!hp) && (addr == INADDR_NONE) ) {
      fprintf(stderr,"Unable to resolve %s\n",argv[1]);
      ExitProcess(STATUS_FAILED);
      }

      if (hp != NULL)
      memcpy(&(dest.sin_addr),hp->h_addr,hp->h_length);
      else
      dest.sin_addr.s_add = addr;

      if (hp)
      dest.sin_family = hp->h_addrtype;
      else
      dest.sin_family = AF_INET;

      dest_ip = inet_ntoa(dest.sin_addr);

      if (argc >2) {
      datasize = atoi(argv[2]);
      if (datasize == 0)
      datasize = DEF_PACKET_SIZE;

      }
      else
      datasize = DEF_PACKET_SIZE;

      datasize += sizeof(IcmpHeader);

      icmp_data = xmalloc(MAX_PACKET);
      recvbuf = xmalloc(MAX_PACKET);

      if (!icmp_data) {
      fprintf(stderr,"HeapAlloc failed %d\n",GetLastError());
      ExitProcess(STATUS_FAILED);
      }


      memset(icmp_data,0,MAX_PACKET);
      fill_icmp_data(icmp_data,datasize);

      while(1) {
      int bwrote;

      ((IcmpHeader*)icmp_data)->i_cksum = 0;
      ((IcmpHeader*)icmp_data)->timestamp = GetTickCount();

      ((IcmpHeader*)icmp_data)->i_seq = seq_no++;
      ((IcmpHeader*)icmp_data)->i_cksum = checksum((USHORT*)icmp_data,
      datasize);

      bwrote = sendto(sockRaw,icmp_data,datasize,0,(struct sockaddr*)&dest,
      sizeof(dest));
      if (bwrote == SOCKET_ERROR){
      if (WSAGetLastError() == WSAETIMEDOUT) {
      printf("timed out\n");
      continue;
      }
      fprintf(stderr,"sendto failed: %d\n",WSAGetLastError());
      ExitProcess(STATUS_FAILED);
      }
      if (bwrote < datasize ) {
      fprintf(stdout,"Wrote %d bytes\n",bwrote);
      }
      bread = recvfrom(sockRaw,recvbuf,MAX_PACKET,0,(struct sockaddr*)&from,
      &fromlen);
      if (bread == SOCKET_ERROR){
      if (WSAGetLastError() == WSAETIMEDOUT) {
      printf("timed out\n");
      continue;
      }
      fprintf(stderr,"recvfrom failed: %d\n",WSAGetLastError());
      ExitProcess(STATUS_FAILED);
      }
      decode_resp(recvbuf,bread,&from);
      Sleep(1000);

      }
      return 0;

      }
      /*
      The response is an IP packet. We must decode the IP header to locate
      the ICMP data
      */
      void decode_resp(char *buf, int bytes,struct sockaddr_in *from) {

      IpHeader *iphdr;
      IcmpHeader *icmphdr;
      unsigned short iphdrlen;

      iphdr = (IpHeader *)buf;

      iphdrlen = iphdr->h_len * 4 ; // number of 32-bit words *4 = bytes

      if (bytes < iphdrlen + ICMP_MIN) {
      printf("Too few bytes from %s\n",inet_ntoa(from->sin_addr));
      }

      icmphdr = (IcmpHeader*)(buf + iphdrlen);

      if (icmphdr->i_type != ICMP_ECHOREPLY) {
      fprintf(stderr,"non-echo type %d recvd\n",icmphdr->i_type);
      return;
      }
      if (icmphdr->i_id != (USHORT)GetCurrentProcessId()) {
      fprintf(stderr,"someone else‘s packet!\n");
      return ;
      }
      printf("%d bytes from %s:",bytes, inet_ntoa(from->sin_addr));
      printf(" icmp_seq = %d. ",icmphdr->i_seq);
      printf(" time: %d ms ",GetTickCount()-icmphdr->timestamp);
      printf("\n");

      }


      USHORT checksum(USHORT *buffer, int size) {

      unsigned long cksum=0;

      while(size >1) {
      cksum+=*buffer++;
      size -=sizeof(USHORT);
      }

      if(size ) {
      cksum += *(UCHAR*)buffer;
      }

      cksum = (cksum >> 16) + (cksum & 0xffff);
      cksum += (cksum >>16);
      return (USHORT)(~cksum);
      }
      /*
      Helper function to fill in various stuff in our ICMP request.
      */
      void fill_icmp_data(char * icmp_data, int datasize){

      IcmpHeader *icmp_hdr;
      char *datapart;

      icmp_hdr = (IcmpHeader*)icmp_data;

      icmp_hdr->i_type = ICMP_ECHO;
      icmp_hdr->i_code = 0;
      icmp_hdr->i_id = (USHORT)GetCurrentProcessId();
      icmp_hdr->i_cksum = 0;
      icmp_hdr->i_seq = 0;

      datapart = icmp_data + sizeof(IcmpHeader);
      //
      // Place some junk in the buffer.
      //
      memset(datapart,‘E‘, datasize - sizeof(IcmpHeader));

      }


        
       
        


      copy命令源代碼 [回復]

      #include <stdio.h>
      void usage(char *msg)
      {
       puts(msg);
       puts("usage: command source target");
       exit(0);
      }
      void errMsg(char *msg)
      {
       puts("File operation failure.");
       puts(msg);
       exit(0);
      }
      int main(int argc, char *argv[])
      {
       FILE *si, *di;
       if(argc==1)
       {
           usage("parameter error");
       }
       else if(argc==2)
       {
           if(si=fopen(argv[1], "rb"))
               usage("Unable copy to itself.\ncopy 0 file.");
           else
               usage("can‘t open the file");
       }
       else if(argc>3)
       {
           usage("parameter error");
       }
        
       if(!(si=fopen(argv[1], "rb")))
           errMsg("can‘t open the file");
       if(!(di=fopen(argv[2], "wb")))
           errMsg("can‘t creat the file");
       while(!feof(si))
           fputc(fgetc(si), di);
            
       fclose(si);
       fclose(di);
       puts("copyed 1 file.");     
       return 0;
      }



      /*
      Name: x_type.c
      Author: x-bit at 167168.kmip.net(純技術論壇)
      Description: 顯示文本文件內容的type命令源代碼
                  dev-cpp5 + win2k 下調試通過
                  轉載請保留上述信息的完整性
      Date: 08-11-2004                
      Copyright: x-bit Allrights Reserved.
      */

      #include <stdio.h>
      void usage(char *msg)
      {
       puts(msg);
       puts("usage: command filename1 [filename2]..."); /*可顯示多個文件內容*/
       exit(0);
      }

      void errMsg(char *msg)
      {
       puts(msg);
       exit(0);
      }
      void type(int argc, char *argv[])
      {
       int i;
       FILE *fp;
       for(i=2; i<=argc; i++)    /*循環顯示多個文件*/
       {
           if(fp=fopen(argv[i-1], "r"))  /*正常打開文件顯示其內容*/
           {
               putchar(‘\n‘);
               puts(argv[i-1]);
               while(!feof(fp))
                   putchar(fgetc(fp));
           }
           else          /*錯誤信息*/
           {
               putchar(‘\n‘);
               puts(argv[i-1]);
               errMsg("can‘t find the file.");
           }
           fclose(fp);
       }
      }

      int main(int argc, char *argv[])
      {
        
       if(argc==1)
           errMsg("parameter error.");
       else
           type(argc, argv);
            
       return 0;
      }

        本站是提供個人知識管理的網絡存儲空間,所有內容均由用戶發布,不代表本站觀點。請注意甄別內容中的聯系方式、誘導購買等信息,謹防詐騙。如發現有害或侵權內容,請點擊一鍵舉報。
        轉藏 分享 獻花(0

        0條評論

        發表

        請遵守用戶 評論公約

        類似文章 更多