****************************** MB Intelligent Tweaker(M.I.T.) ****************************** Robust Graphics Booster ..............: [A] CPU Clock Ratio ......................: [8X] x Fine CPU Clock Ratio................: +0.0 CPU Frequency ........................: 4.096GHz( 512X8)
********** Clock Chip Control ********
>>>>> Standard Clock Control CPU Host Clock Control................: [Enabled] x CPU Host Frequency(Mhz).............: [512] PCI Express Frequency(Mhz)............: [100] C.I.A.2...............................: [Disabled]
Performance Enhance...................: [Standard] Extreme Memory Profile(X.M.P.)........: [Disabled] (G)MCH Frequency Latch................: [Auto] System Memory Multiplier (SPD)........: [2.00D] Memory Frequency(Mhz).....800.........: 1024 DRAM Timing Selectable (SPD)..........: [Manual]
>>>>> Standard Timing Control x CAS Latency Time................5...: [ 5] x tRCD ...........................5...: [ 5] x tRP.............................5...: [ 5] x tRAS...........................18...: [15]
>>>>> Advanced Timing Control.........: [Press Enter] x tRRD............................3...: [ 3] x tWTR............................3...: [ 3 (11 in Windows)] x tWR.............................6...: [ 5 (14 in Windows)] x tRFC...........................52...: [54] x tRTP............................3...: [ 1 (4 in Windows)] x Command Rate (CMD) .............0...: [ 2]
>>>>> Channel A Timing Settings.......: [Press Enter] x Static tRead Value.............10...: [11] x tRD Phase0 Adjustment...........0...: Auto x tRD Phase1 Adjustment...........0...: Auto x tRD Phase2 Adjustment ..........0...: Auto x tRD Phase3 Adjustment...........0...: Auto
x Trd2rd(Different Rank)..........6...: Auto x Twr2wr(Different Rank)..........6...: Auto x Twr2rd(Different Rank)..........5...: Auto x Trd2wr(Same/Diff Rank)..........8...: Auto
x DIMM1 Clock Skew Control (ps).......: Auto x DIMM2 Clock Skew Control (ps).......: Auto x DDR Write Training..................: Auto
>>>>> Channel A Driving Settings......: [Press Enter] x Driving Strength Profile............: [1066MHz]
x Data Driving Pull-Up Level..........: Auto x Cmd Driving Pull-Up level...........: Auto x Ctrl Driving Pull-Up Level..........: Auto x Clk Driving Pull-Up Level...........: Auto
x Data Driving Pull-Down Level........: Auto x Cmd Driving Pull-Down level.........: Auto x Ctrl Driving Pull-Down Level........: Auto x Clk Driving Pull-Down Level.........: Auto
>>>>> Channel B Timing Settings.......: [Press Enter] x Static tRead Value.............10...: [11] x tRD Phase0 Adjustment...........0...: Auto x tRD Phase1 Adjustment...........0...: Auto x tRD Phase2 Adjustment ..........0...: Auto x tRD Phase3 Adjustment...........0...: Auto
x Trd2rd(Different Rank)..........6...: Auto x Twr2wr(Different Rank)..........6...: Auto x Twr2rd(Different Rank)..........5...: Auto x Trd2wr(Same/Diff Rank)..........8...: Auto
x DIMM1 Clock Skew Control (ps).......: Auto x DIMM2 Clock Skew Control (ps).......: Auto x DDR Write Training..................: Auto
>>>>> Channel B Driving Settings......: [Press Enter] x Driving Strength Profile............: [1066MHz]
x Data Driving Pull-Up Level..........: Auto x Cmd Driving Pull-Up level...........: Auto x Ctrl Driving Pull-Up Level..........: Auto x Clk Driving Pull-Up Level...........: Auto
x Data Driving Pull-Down Level........: Auto x Cmd Driving Pull-Down level.........: Auto x Ctrl Driving Pull-Down Level........: Auto x Clk Driving Pull-Down Level.........: Auto
Voltage Types..........Normal...........Current ----------------------------------------------- >>> CPU Load-Line Calibration.................: [Enabled] CPU Vcore..............1.27500V.......: [1.4V (1.38V in Windows)] CPU Termination........1.200V.........: [1.300V] CPU PLL................1.500V.........: [1.65V] CPU Reference..........0.760V.........: [.76 (.7 when VTT is 1.2)] >>> MCH/ICH MCH Core...............1.100V.........: [1.380V] MCH Reference..........0.760V.........: [.72] MCH/DRAM Reference.....0.900V.........: [1.05] ICH I/O................1.500V.........: [1.5V] ICH Core...............1.100V.........: [1.1V] >>> DRAM DRAM Voltage...........1.800V.........: [2.12V (2.11 in Windows)] DRAM Termination.......0.900V.........: [1.05] Channel A Reference....0.900V.........: [1.05] Channel B Reference....0.900V.........: [1.05]
******** Advanced BIOS Features ******** No-Execute Memory Protect.............: [Enabled] CPU Enhanced Halt (C1E)...............: [Disabled] C2/C2E State Support..................: [Disabled] x C4/C4E State Support................: Disabled CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.....................: [Disabled] Virtualization Technology.............: [Disabled] Delay For HDD (Secs)..................: [ 0] Full Screen LOGO Show.................: [Disabled] Init Display First....................: [PEG]
******** Integrated Peripherals ******** USB Keyboard Function.................: [Disabled] USB Mouse Function....................: [Disabled] USB Storage Function..................: [Disabled]
