鳳凰2011/2012通過USB數據線刷機教程與強刷教程

renhe2011 2014-04-30

展開全文

鳳凰2011/2012通過USB數據線強刷教程

鳳凰的安裝和資料的安裝參考樓上

注意：
1.不管最高版本的資料是否有中文，只要機器無法開機，必須強刷最高版本的資料，否則強刷無法成功；
2.S40非智能機機型強刷成功后需要按照樓上的方法在開機狀態下重新刷一遍，否則丟失證書；

1.打開鳳凰，并且打開電腦的設備管理器，連接手機至電腦，不插手機電池

2.保持NO CONNECTION首位，點擊“File” - “Open Product”

QQ截圖20110406173230.png

3.選擇死機的工廠代碼（RM-xxx），一般從電池倉內的標簽里可以尋找到

QQ截圖20110406173634.png

4.點擊“Flashing” - “Firmware Update”

QQ截圖20110406173729.png

5.點擊旁邊的“...”進行CODE的選擇，選擇有中文的CODE，一般（S60機型：APAC1、Singapore、Malaysia）（S40機型：APAC-X、APAC-R）地區的CODE都有中文，選好點擊OK，如果最高版本資料沒有中文，就隨便選個，確保是最高版本

QQ截圖20110406173741.png

6.勾選“Dead phone USB Flashing”，點擊“SW Reset”開始強刷

QQ截圖20110406173823.png

7.等到出現如下提示，點擊確定后插上電池，按開機鍵3秒松手，此時可以聽到電腦有叮咚的聲音，說明檢測到新驅動（N97等機型無需按開機鍵，只要插上電池，即可被檢測到），如果過了10秒鐘設備管理器不出現下圖2個驅動，請直接拔了電池再插上電池，按開機鍵3秒松手，直到出現2個USB驅動為止

QQ截圖20110406174101.png

2個USB驅動圖例

8.強刷正常進行，中途設備管理器里的2個USB驅動會轉換為2個ADL驅動，如下圖（N96不會變?yōu)?個ADL，永遠是2個USB）

QQ截圖20110406174133.png

9.點擊確定，強刷成功，手機會自動開機，如果沒有開機，可以嘗試移除電池再插上電池，按開機鍵

QQ截圖20110406174347.png

完整強刷進度

Code:

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15232 bytes
Secondary boot loaded
Loading update server code: 2884815 bytes
Update server loaded
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Asic CMT: Start programming 165230 KB...
Asic CMT: Partitioning RM-555_12.0.110_prd.core.C00
Asic CMT: Partitioning area 1...
Asic CMT: Erasing RM-555_12.0.110_prd.core.C00
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing area 4...
Asic CMT: Erasing partition 0x0000000A...
Asic CMT: Erasing RM-555_12.0.110_prd.rofs2.V19
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-555_12.0.110_C01_prd.rofs3.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM555_12.0.110_uda_11_001.uda.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing rm555ENOA09w24v0.050.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Programming RM-555_12.0.110_prd.core.C00
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming 8%
Asic CMT: Programming 10%
Asic CMT: Programming 12%
Asic CMT: Programming 14%
Asic CMT: Programming 16%
Asic CMT: Programming 18%
Asic CMT: Programming 20%
Asic CMT: Programming 22%
Asic CMT: Programming 24%
Asic CMT: Programming 26%
Asic CMT: Programming 28%
Asic CMT: Programming 30%
Asic CMT: Programming 32%
Asic CMT: Programming 34%
Asic CMT: Programming 36%
Asic CMT: Programming 38%
Asic CMT: Programming 40%
Asic CMT: Programming 42%
Asic CMT: Programming 44%
Asic CMT: Programming 46%
Asic CMT: Programming 48%
Asic CMT: Programming 50%
Asic CMT: Programming 52%
Asic CMT: Programming 54%
Asic CMT: Programming 56%
Asic CMT: Programming 58%
Asic CMT: Programming 60%
Asic CMT: Programming 62%
Asic CMT: Programming RM-555_12.0.110_prd.rofs2.V19
Asic CMT: Programming 64%
Asic CMT: Programming 66%
Asic CMT: Programming 68%
Asic CMT: Programming 70%
Asic CMT: Programming 72%
Asic CMT: Programming 74%
Asic CMT: Programming 76%
Asic CMT: Programming 78%
Asic CMT: Programming 80%
Asic CMT: Programming 82%
Asic CMT: Programming 84%
Asic CMT: Programming RM-555_12.0.110_C01_prd.rofs3.fpsx
Asic CMT: Programming RM555_12.0.110_uda_11_001.uda.fpsx
Asic CMT: Programming 86%
Asic CMT: Programming 88%
Asic CMT: Programming 90%
Asic CMT: Programming 92%
Asic CMT: Programming 94%
Asic CMT: Programming 96%
Asic CMT: Programming 98%
Asic CMT: Programming rm555ENOA09w24v0.050.fpsx
Asic CMT: Programming 100%
Asic CMT: Verifying communication to device...
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Product code changed
Doing factorysets
Factorysets complete
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.1
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 1 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Firmware updating succeeded.

關注我的新浪微博 | 騰訊微博
任何疑問可發郵件至seidea@me.com

本站是提供個人知識管理的網絡存儲空間，所有內容均由用戶發布，不代表本站觀點。請注意甄別內容中的聯系方式、誘導購買等信息，謹防詐騙。如發現有害或侵權內容，請點擊一鍵舉報。

轉藏 分享

QQ空間 QQ好友新浪微博微信

獻花（0） +1

來自： renhe2011 > 《手機》

舉報/認領