VC6.0工程改名和多個工程合并到一個工作空間小技巧

牛人的尾巴 2014-12-20

展開全文

VC6.0 工程改名和多個工程合并到一個工作空間小技巧

前提：

為了將多個工程合并到一個工作空間，可以批量編譯，每個工程必須不同名。因此要對工程改名。

但其他文件和類的名字不改變，否則要動大手術(shù)，不在本文討論之列。

操作步驟：

（1）刪除 .dsw 文件。改好了會再自動生成的。

（2）比如要把工程名由 HY 改成 CY：

打開 HY.dsp：

# Microsoft Developer Studio Project File - Name="HY" - Package Owner=<4>
# Microsoft Developer Studio Generated Build File, Format Version 6.00
# ** DO NOT EDIT **

# TARGTYPE "Win32 (x86) Application" 0x0101

CFG=HY - Win32 Debug
!MESSAGE This is not a valid makefile. To build this project using NMAKE,
!MESSAGE use the Export Makefile command and run
!MESSAGE
!MESSAGE NMAKE /f "HY.mak".
!MESSAGE
!MESSAGE You can specify a configuration when running NMAKE
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE
!MESSAGE NMAKE /f "HY.mak" CFG="HY - Win32 Debug"
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "HY - Win32 Release" (based on "Win32 (x86) Application")
!MESSAGE "HY - Win32 Debug" (based on "Win32 (x86) Application")
!MESSAGE

# Begin Project
# PROP AllowPerConfigDependencies 0
# PROP Scc_ProjName ""
# PROP Scc_LocalPath ""
CPP=cl.exe
MTL=midl.exe
RSC=rc.exe

!IF "$(CFG)" == "HY - Win32 Release"

# PROP BASE Use_MFC 6
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "Release"
# PROP BASE Intermediate_Dir "Release"
# PROP BASE Target_Dir ""
# PROP Use_MFC 5
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Release"
# PROP Intermediate_Dir "Release"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MD /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_AFXDLL" /Yu"stdafx.h" /FD /c
# ADD CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /Yu"stdafx.h" /FD /c
# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
# ADD BASE RSC /l 0x804 /d "NDEBUG" /d "_AFXDLL"
# ADD RSC /l 0x804 /d "NDEBUG"
BSC32=bscmake.exe
# ADD BASE BSC32 /nologo
# ADD BSC32 /nologo
LINK32=link.exe
# ADD BASE LINK32 /nologo /subsystem:windows /machine:I386
# ADD LINK32 /nologo /subsystem:windows /machine:I386 /out:"Release/HY.exe"

!ELSEIF "$(CFG)" == "HY - Win32 Debug"

# PROP BASE Use_MFC 6
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "Debug"
# PROP BASE Intermediate_Dir "Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 6
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Debug"
# PROP Intermediate_Dir "Debug"
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_AFXDLL" /Yu"stdafx.h" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_AFXDLL" /D "_MBCS" /Yu"stdafx.h" /FD /GZ /c
# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
# ADD BASE RSC /l 0x804 /d "_DEBUG" /d "_AFXDLL"
# ADD RSC /l 0x804 /d "_DEBUG" /d "_AFXDLL"
BSC32=bscmake.exe
# ADD BASE BSC32 /nologo
# ADD BSC32 /nologo
LINK32=link.exe
# ADD BASE LINK32 /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
# ADD LINK32 /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept

!ENDIF

# Begin Target

# Name "HY - Win32 Release"
# Name "HY - Win32 Debug"
# Begin Group "Source Files"

# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"

。。。后面涉及到其他文件，不改動！

（3）把這些紅色的HY改成CY即可，并把文件名改為 CY.dsp ：

# Microsoft Developer Studio Project File - Name="CY" - Package Owner=<4>
# Microsoft Developer Studio Generated Build File, Format Version 6.00
# ** DO NOT EDIT **

# TARGTYPE "Win32 (x86) Application" 0x0101

CFG=CY - Win32 Debug
!MESSAGE This is not a valid makefile. To build this project using NMAKE,
!MESSAGE use the Export Makefile command and run
!MESSAGE
!MESSAGE NMAKE /f "CY.mak".
!MESSAGE
!MESSAGE You can specify a configuration when running NMAKE
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE
!MESSAGE NMAKE /f "CY.mak" CFG="CY - Win32 Debug"
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "CY - Win32 Release" (based on "Win32 (x86) Application")
!MESSAGE "CY - Win32 Debug" (based on "Win32 (x86) Application")
!MESSAGE

# Begin Project
# PROP AllowPerConfigDependencies 0
# PROP Scc_ProjName ""
# PROP Scc_LocalPath ""
CPP=cl.exe
MTL=midl.exe
RSC=rc.exe

!IF "$(CFG)" == "CY - Win32 Release"

!ELSEIF "$(CFG)" == "CY - Win32 Debug"

# PROP BASE Use_MFC 6
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "Debug"
# PROP BASE Intermediate_Dir "Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 6
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Debug"
# PROP Intermediate_Dir "Debug"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_AFXDLL" /Yu"stdafx.h" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /D "_AFXDLL" /Yu"stdafx.h" /FD /GZ /c
# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
# ADD BASE RSC /l 0x804 /d "_DEBUG" /d "_AFXDLL"
# ADD RSC /l 0x804 /d "_DEBUG" /d "_AFXDLL"
BSC32=bscmake.exe
# ADD BASE BSC32 /nologo
# ADD BSC32 /nologo
LINK32=link.exe
# ADD BASE LINK32 /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
# ADD LINK32 /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept