|
我根據arm-linux-gdb的調試對象，把調試分為二大類。即底層代碼的調試，如u-boot、裸機程序等；或者應用程序的調試，即elf格式的可執行文件。根據我的經驗，應用程序的調試相對要容易很多。下面，詳細闡述調試經歷……
應用篇：用arm-linux-gdb調試應用程序 開發機，即我電腦虛擬機中的ubuntu；目標機，即跑有l(wèi)inux系統的arm開發板。開發機和目標機通過網線連接在一個局域網內，一個網段，確保相互要ping得通。 在開發機中，通過minicom、ssh或者telnet登錄開發板，要能看到開發板的文件系統。步驟如下：（ubuntu的IP是192.168.16.200， arm板的IP是192.168.16.40，兩者均使用2015端口通信） 【1 打開終端，遠程登錄開發板】 wuxian@ubuntu:~$ ssh root@192.168.16.40 root@192.168.16.40's password: 123 #
【2 另啟終端，編譯elf可執行文件】 wuxian@ubuntu:~$ touch hello.c 1 #include<stdio.h> 2 3 intmain(int argc, char *argv[]) 4 { 5 for(inti=0; i<100; i++) 6 { 7 printf("hello,world!\n"); 8 } 9 return0; 11 } wuxian@ubuntu:~$ arm-linux-gcc -g hello.c -o hello --std=c99
【3 拷貝文件到目標開發板】 wuxian@ubuntu:~$ scp ./hello root@192.168.16.40:/root root@192.168.16.40's password: hello 100%6200 6.1KB/s 00:00
【4 上目標機查看拷貝情況】 # ls hello # pwd /root #
【5 在目標機上打開gdbserver】準備為客戶端arm-linux-gdb服務 # gdbserver 192.168.16.200:2015 hello //192.168.16.200是開發機的ip，2015是監聽端口， Process hello created; pid = 27991 //提示信息 Listening on port 2015
【6 在開發機上打開arm-linux-gdb】準備調試 wuxian@ubuntu:/opt/arm/4.3.2/bin$ ./arm-linux-gdb ~/hello GNU gdb (Sourcery G++ Lite 2008q3-72)6.8.50.20080821-cvs Copyright (C) 2008 Free SoftwareFoundation, Inc. License GPLv3+: GNU GPL version 3 orlater <http:///licenses/gpl.html> This is free software: you are free tochange and redistribute it. There is NO WARRANTY, to the extentpermitted by law. Type "showcopying" and "show warranty" fordetails. This GDB was configured as "--host=i686-pc-linux-gnu--target=arm-none-linux-gnueabi". For bug reporting instructions, pleasesee: <https://support./GNUToolchain/>... (gdb) target remote 192.168.16.40:2015 Remote debugging using192.168.16.40:2015 warning: Unable to find dynamic linkerbreakpoint function. GDB will be unable to debug sharedlibrary initializers and track explicitly loaded dynamiccode. 0x400cc8c0 in ?? () (gdb) l 1 1 #include<stdio.h> 2 3 intmain(int argc, char *argv[]) 4 { 5 for(inti=0; i<100; i++) 6 { 7 printf("hello,world!\n"); 8 } 9 10 return0; (gdb) 11 } (gdb) b main Breakpoint 1 at 0x8480: file hello.c,line 5. (gdb) c Continuing. Error while mapping shared librarysections: /lib/libc.so.0: No such file ordirectory. Error while mapping shared librarysections: /lib/ld-uClibc.so.0: No such file ordirectory.
Breakpoint 1, main (argc=1,argv=0xbe9bad74) at hello.c:5 5 for(inti=0; i<100; i++) (gdb) n 7 printf("hello,world!\n"); (gdb) n 5 for(inti=0; i<100; i++) (gdb)
【7 再看看目標機上的反應】 # gdbserver 192.168.16.200:2015 hello Process hello created; pid = 27991 Listening on port 2015 Remote debugging from host 192.168.16.200 hello,world!
|
|
|
