更多精彩等你發現！

HAVE FUN EVERYDAY

昨天，樂高公布了2018年第一期的IDEAS投稿的作品，而這一次的10款作品是不是都讓你覺得很精彩呢？我們一起來看看！

Embraer A-29 Super Tucano (Smoke Squadron)

作品地址：https://ideas./projects/a4d585a8-02cc-4a3d-b485-8f606ff8a02c

ENGLISH:

          Hello Everyone and welcome to my latest project! Well, a bit different one... :)

          I usually build cars, but today I have a different, yet amazing, creation to offer. This is the Embraer A-29 Super Tucano, a light attack, advanced training, multi-purpose military turboprop, used by 10 countries from 3 continents, including Brazil itself, where it was born. This Specific version is from Brazilian Air Force's Smoke Squadron, a.k.a. Esquadrilha da Fuma?a da FAB, that is focused on pacific air demonstration instead.

           The seven airplanes that constitute the squadron perform amazing air stunts that will leave you amazed if you see in video, and speechless if you see live. My attempt of recreating the Smoke Squadron A-29 is shown in the following pictures. My airplane features:

           - Retractable landing gear;
           - Movable rudder and elevator;
           - Stand for Display;
           - Removable canopy for inside look; and
           - Spinnable 5-blade propeller. 

          The propeller is unique, since it is brick-built (TLC does not offer a 5-bladed one). This replica is ~1:39 scaled and has around 400 bricks. 

            So, if you liked it, could you please give your support? I'd be so glad!
            Thank you a lot for your time and have a nice day!

            Alex

SR-71A The Final Flight

作品地址：https://ideas./projects/a0a7940a-e575-420f-ace5-2b7bd3d962c7

SR-71A - NASA 844 - The Final Flight 

On October 9th 1999, NASA performed the final flight for the entire SR-71 fleet in the SR-71A aircraft designation NASA 844. 

NASA crews flew four Lockheed SR-71 airplanes during the 1990s. Two were used for research and two to support Air Force reactivation of the SR-71 for reconnaissance missions.  The aircraft was 107.4 feet (32.73 meters) long, had a wingspan of 55.6 feet (16.94 meters), and stood 18.5 feet (5.63 meters) high (from the ground to the top of the rudders when parked).  Aerodynamic control surfaces consisted of all-moving vertical tail fins above each engine nacelle and elevons on the outer wings and trailing edges between the engine exhaust nozzles.

The airframes were built almost entirely of titanium and other exotic alloys to withstand heat generated by sustained high-speed flight. Capable of cruising at Mach 3 continuously for more than one hour at a time, the Blackbirds provided a unique research platform for thermal experiments because heat-soak temperatures exceeded 600 °F.

SR-71A (61-7980/NASA 844) was built on the 16th May 1967 and first flew on 25th September 1967.  NASA 844 arrived at Dryden on Feb. 15, 1990. It was placed into storage until 1992 and served as a research platform until its final flight on October 9, 1999.

This was the final flight for the entire fleet of SR-71s, the fastest, and in my opinion, the greatest plane to ever grace the sky.

My Lego SR-71 is built to a minifig scale of 1 stud/ft representing the NASA 844 aircraft to compliment the other excellent LEGO NASA models.  It is shown with the engine starter and pilot in the custom pressurised suit, and if you splash a bit of water under it, it will look like the real one leaking fuel on the tarmac.

Construction has been done using a simpler slope configuration on the fuselage.  You can achieve a more accurate shape with curved slopes and hinges but it is not as sturdy or kit friendly.  Wing shape has been achieved using standard wedge plates.  A lot of SNOT techniques are used in the J58 Engines to maintain shape and provide support for the wing.

The SR-71 is still a popular plane today across all generations as it has appeared in a number of movies and computer games as it is so easily recognisable.  Thank you for your support.

Approx number of pieces: 1000 

Treehouse

作品地址：https://ideas./projects/ab7ac32b-e713-489d-bdc6-e14b22738ba8

Since my early childhood I have been fascinated by construction and modelling. 
That's why I was excited to receive new Lego boxes for christmas or birthday. I loved to constructed them but i was more excited to use this new bricks for my own creations.

Passionated by nature, wildlife and wood constructions, I concretized this project about childhood dreams and travel. The idea was emerged during a unusual week-end with friends in treehouses, such as Robinson Crusoé.  

Project name: Treehouse
Story: It's a aventurers' family which rebuild their life after being lost. Using recovered materials, they adopted a tree as a new place to live.
Total parts: 2643
Creation time: about 600h
Details: 
-3 aventurers' minifigures (man, woman, child)
-animals (cat, parrot, frog, spider)
-3 wooden cabins (2 bedrooms and 1 bathroom)
-detachable cabins clip-on tree and roofs clip-on cabins
-scale of treehouse respected compared to minifigures

Thanks for your support and comments :-)

Stitch

作品地址：https://ideas./projects/ef31dc6a-6a39-4c8d-8dfa-57c64550c390

From Disney's Lilo and Stitch, its everyone's favorite genetic experiment, Stitch! 

Stitch highly poseable. With 13 points of articulation he can truly capture the character and personality of Lilo's lovable blue 'dog'. He would make a great addition to anyone's ohana with all the cuteness and charm and absolutely no destruction and mayhem. The overall design is quite simple making it perfect for kids and adult to build. At 7 inches tall he'd be right at home on a desk at the office or in a kid's room. The ball joints and hinged elements make him easy to change from one pose to another. The design is also ready for adaptations like adding Stitch's extra set of arms and antennas. 

Ohana means family, and family means nobody gets left behind, or forgotten. So don't forget to vote and make Stitch a part of the LEGO ohana. 

Modular Arcade

作品地址：https://ideas./projects/eb98cce3-bb35-48ed-9aa0-3ec800b554a6

Hello!

I've always wanted to make a Modular Arcade for quite some time, but didn't know where to start (this inspiration happened around the same time I came out of my LEGO dark ages). Many new elements were introduced, which can be overwhelming especially after 9 years. But after practicing and relearning the ingenuity of new and old LEGO bricks, I made what I believe is my best model yet. This Modular Arcade includes 3 main floors: Pizzeria, Arcade, and Apartment. Details are listed below.

 Exterior:

Phone booth

Coin operated spaceship ride

Rooftop with lounge chairs, plants, pergola, and fire pit

Pizzeria Floor:

Pizza slices

Pizza boxes

Brick oven

Fountain drink dispenser

And more!

Arcade Floor:

Prize counter

Skee ball

Hockey table

Dancing game

Classic arcade machine

Racing arcade machine

Blaster arcade machine

Claw machine

Apartment Floor:

Kitchen

Living room with couch and TV

Bedroom with bed

Bathroom with shower, toilet, and sink

There are many more details throughout the model that it would take a while to list them all. I'll leave them for you to discover!

 Anways, thanks for visiting! Any feedback or criticism is greatly appreciated.

I am Amelia Earhart

作品地址：https://ideas./projects/6e99ac19-94bf-4470-8159-9eae6ba22f1e

Now you can say: "I am Amelia Earhart!”

Amelia Earhart was a girl who loved adventure, and never let anybody stop her from trying new things. Even things that girls had never done before—like flying all the way across the Atlantic Ocean. Eventually she broke flying records and proved to the world that women can soar just as high as men.

Based on the bestselling book series by Brad Meltzer and Chris Eliopoulos, this set consists of the bright yellow biplane that Amelia Earhart bought for herself. She named it Canary (which is a cool name for a plane, right?).

Plus, you get an Amelia Earhart minifigure!

This set has a wonderful educational value, but it’s also downright fun. Fly! Zoom! And of course, soar!

The presented set consists of 186 parts. Please support it if you’d like to see it as a real product. Our true goal is to then give you the rest of the heroes in the book series: I am Abraham Lincoln, I am Rosa Parks, I am Albert Einstein, and so many more…

Help give your kids real heroes.

Like the book says: I am Amelia Earhart. I know no bounds. And I hope you’ll remember that the greatest flight you’ll ever take is the one no one has tried before.

LEGO Mystery Science Theater 3000

作品地址：https://ideas./projects/577fb21b-654e-4add-91c6-0cfe4677a49c

In the not-too-distant future, next Sunday A.D... there could be a LEGO set based on one of the most iconic TV shows of all time! Mystery Science Theater 3000, or MST3K for short, is a show about a guy who gets shot into space by mad scientists and is forced to watch the worst movies of all time. He and his robot friends, Tom Servo, Crow T. Robot, Gypsy, and Cam-bot, make fun of the movie as it plays and perform comedy skits in-between the film to keep their sanity. The show went through numerous changes, with the main host changing from Joel to Mike, the Mads and robot's voices changing, even the entire sets changing. By the time the show ended in 1999, the entire cast was completely different from when it first began in 1989. Now, with a revival planned for release in late 2016, with a whole new cast and crew, there has never been a better time to commemorate! 

       Included in the set would be both of the show's unwilling hosts, Joel Robinson and Mike Nelson! Of course, all of the 'Bots from the show would be included as well: Cam-Bot, Gypsy, Tom Servo, and Crow! Every one of the Mads would be included in their locations as well; including Dr. Erhardt, TV's Frank, Professor Bobo, Brain Guy, and both Dr, Clayton and Pearl Forrester! The set would also include the Satellite of Love, the vessel that trapped Joel, Mike, and the Bots. The host room with "Movie Sign!" lights and buttons, famous hallway doors, and the theater will all be included! This show had talented writers, an original premise, and lasting pop cultural fame to this day. Thanks to Mystery Science Theater, we all take bad movies a little less seriously now, and laugh when there was nothing funny before.

Acclamator Class Assault Ship

作品地址：https://ideas./projects/4fd31e62-e604-4976-a085-77e503f6ebbc

Hello again everybody! This is my new and improved Lego Acclamator. The Acclamator was an assault-ship used by the Galactic Republic. These ships have participated in numerous space battles, and were also utilized to land clone troopers, AT-TEs, and other clone artillery on a planet. This iconic ship could serve as a display piece or playable model for Lego builders ranging from experts to beginners, or a die-hard Star Wars fan to a child building for the first time with his/her parent.

I decided to build an Acclamator because of its apparent transparency with Lego builders; it has not been a common ship constructed throughout the Lego community. So I took this as a challenge to build a unique, sophisticated, and beautiful Acclamator model, that is reminiscent of the fear and power associated with the classic Star Destroyer (a ship that every Star Wars fan loves!).

About 60 hours of LDD designing went into this model, especially regarding the frame as well as attempting to replicate all of the Acclamator's defining angles present in the actual model of the assault-ship. Some of the angles are subtle and others prominent, and I needed a sturdy frame to make sure that all of the pieces fit together properly. I used technic pieces and tried to maximize the amount of connections between parts in the frame. My favorite parts of the ship are the two slightly inward tapering sections: the center spine running down the middle of the ship, and the tail of the ship. Even though these are subtle details, they make the Acclamator appear more realistic and smooth, as it more closely resembles the actual ship. 

What is different than my previous Acclamator model is the addition of interior features. There are separate "rooms" underneath the two triangular "top wings" of the ship. These wings are attached by several hinged pieces and can easily be removed and reattached. The four rooms include: medical area, turret controls, engine room, and a secret hatch room. The medical area includes two white swivel beds for injured clones/other patients, and could feature a 2-1B medical droid minifigure. The turret controls room features two stations for clone gunners, as well as an area containing ammunition canisters to replenish the turrets. The engine room contains pipes carrying fuel to the engines and a planning station to perform engine maintenance. Finally, the secret hatch room features a hatch (obviously) that can be covered and uncovered; secret supplies, small weapons, or ammunition can be stored here.

Thank you for taking the time to read about and view my creation! I greatly enjoyed designing this ship, and rendering the awesome realistic pictures (thank you POV-RAY and Bluerender!). Even though I'm in college (away from my bins of Lego D:) I will continue to keep designing and building! Thank you for reading, and thank you for your support!

作品地址：https://ideas./projects/95f87b23-1eea-41ca-a57d-81a9adda08fa

Build, display, and role-play with the Flintstones and Rubbles in Bedrock. The Flintstones car features luggage, a rotate open top for ease of minifigure placement and room for two seated and additional minifigures. The car can be dynamically positioned on its dirt path, and 'tip' over when the dinosaur ribs are attached. When the car and stand are placed next to the home they double as the driveway.

The Flintstones home features a rotate open front door, an interior with curtains, couch, TV, coffee table, lamp, phone, kitchen sink with faucet, and a bird powered music player! The roof segment with slight force slides out to help show and play with the interior.

The exterior features a wall, palm tree, flowers, and a dinosaur powered lawn mower! A Bedrock Sign is included with perched Dinosaur bird!

Includes 6 minifigures: Fred, Flintstone, Wilma Flintstone, Pebbles Flintstone, Barney Rubble, Betty Rubble, and Bamm Bamm Rubble. Dino might be added as an update.

Total part count including minifigures is 770

Growing up I enjoyed watching The Flintstones. I feel it both translates well, and would prove popular in brick form. 

LEGO, should this get to review I will supply you with the Ldd file. I am open to you changing aspects of the design to suit your needs by choosing which minifigures you want, and deciding if you want the home roughly as shown, a reduced detail version, a facade, or not have it at all. 

Thank you for your support and consideration.

作品地址：https://ideas./projects/ba271bcd-1624-40f9-bf0a-ae2db2f5b0d1

This is the 1967 BMW R60/2. Known across the world for its ruggedness and reliability, the R60 could provide a steady ride to rider and passenger alike. Nowadays, this vintage bike is still as reliable as it was 50 years ago.

      This Lego model was made for a friend and fellow Lego enthusiast to commemorate his father, who would take him on rides in this very motorcycle through the countryside. It is constructed to match all the various specifications and details of the original bike, including the unique triangular front fork, hand brakes, a fuel tank, twin engines, a tire inflator, twin engines, and a side car (as of now still a work in progress), as well as a rotating handlebars and a retractable kickstand.

Do you want your stormtrooper to have a stunning R60 motocycle to ride? Give us a vote, you won't regret it!

精彩的作品，來自JK BrickWork的樂高“木頭鴨子”！

來自JK Brick設計的樂高“木頭鴨子”，我拼好啦！

而格蘭特的年紀只有19歲，所以能設計出這樣精彩作品，同樣是非常厲害。他最喜歡的樂高設計師是吉米（Jamie Berard）